Density, Mass, Force, Motion, Quantity

https://cafe.daum.net/GUJORON/Y8b1/7 (원문 링크)

Density(= field, quality), Mass, Force, Motion, Quantity

Through a closed system, Event has a decision-making process of 5 steps. Decision making uses symmetry. Again, symmetry creates an axis by sharing the interlocking junction of any two. Decision-making repeats symmetry and asymmetry in the system, moving from one balance to another. When an external force acts on a homogeneous system, the internal inconsistency occurs. The Event proceeds until the inconsistency is resolved. This is whether the external force is returned to the action side, or whether it is evenly distributed inside in the form of rotation or temperature, or whether it is discharged in the form of heat, light, and vibration. If the inside of the system is not uniform, the system is divided by an external force. A homogeneous system creates a balance between external and internal forces. The balance of centripetal and centrifugal forces is what makes the core. Decision making is to transfer the position of the core by the inertial force.

Density combines, Mass becomes independent, Force trades, Motion changes, Quantity penetrates. Density creates a uniform system with the symmetry of external and internal forces, Mass derives the core from the symmetry of centrifugal force and centripetal force, Force determines the spatial movement direction of the core with forward and reverse symmetry, and Motion determines the symmetry of temporal order to proceed with the core movement process, and Quantity emmits energy to the outside in a symmetrical manner on the outside and inside, and ends the event. There are cases where the permanent motion continues, but it is from the standpoint of an external observer, and in fact, it is stopped in a state of motion internally. Earth dominates orbit around the sun, interacts with the sun and is at rest.

We capture changes in nature with Motion and Quantity. Quantity is direct information such as color, sound, and heat. In Motion, the process of change is displayed in the human view in the form of movement. Force is invisible, but it can be inferred because it determines the magnitude of motion. Mass is recognized because the core is hidden inside, but the core is reinforced when the event is repeated. The reason the core of the fruit is hard is because the core is reinforced. If the core is weak, it cannot resist the action of external force and is broken from the core. A system can be identified because it is uniform on the inside and closed to the outside. When something moves, the part that follows it is included in the system.

System, Mechanism, Structure, Action, Code (also as Density, Mass, Force, Motion, Quantity)

There are five parts (structures) included in Event: energy input, change starting point, decision making, change ending point, and energy output. How will Event receive external forces? Where to start with the change in handling external forces? Where are you going to move the core? How far will the change go? How will you end the change? In Event, these five must be decided.

The structure that people usually talk about is the third Structure. That is, Force is the third of Density, Mass, Force, Motion, and Quantity. This is where the key decisions are made and the rest is supported. Every tool or device has a cutting edge responsible for making decisions. It is like the blade of a sword, like the tip of a ballpoint pen, and like the needle of a fork. Or the narrow middle part of the hourglass. The decision is sharpened as it orients the course at the center of the symmetry. Since the center is a point, all structures have a sharp starting point from which decision-making begins.

Many tools made and used by humans have structures exposed to the outside. People call this Analog. For example, a person cutting a fish with a knife. The hand corresponds to Density, the knife to Mass, the blade to Force, the fish to Motion, and the cutting board to Quantity. (At this time, the chopping board is not a chopping board that supports the power of the knife, but refers to the place where the cut fish resulting from an event is accumulated.) Conversely, if the structure is hidden inside like a computer, it can be said as Digital.

Mechanism[2] has a form in which two gears are interlocked. And the part where the two teeth meet is Structure[3]. In the case of an hourglass, it is the narrow center of the hourglass, and in the case of a balance scale, this is the center where the two plates engage.

Adding an energy input to the Mechanism results in System[1]. The System circulates energy by its own power. The Mechanism, which has not been developed to the System, must be operated by a human hand. If you subtract the motor from a machine, the rest becomes the Mechanism. The watermill is a connection between the waterwheel and the mill, and this connection is Structure. It is a spinning wheel that makes yarn by turning the wheel by hand instead of water.

A mill is just a Mechanism, not a System. A watermill that adds water supply to this becomes a System. The Mechanism of treadmill transfers the change of tread[A] to the change of mill[B]. And when C (leg or foot) that unifies both is prepared, it becomes a System including it.

Action[4] is an exposed part that moves to the outside. A treadmill is a hammer that hits the bowl. Code[5] is the part where the result is revealed. It is the bowl of the watermill.

Everything in nature exists totally in the form of systems. Each of System, Mechanism, Structure, Action, Code cannot exist partially. Of course we can name parts of the ecosystems. But it cannot exist without energy. Therefore, stones that roll in the mountains actually exist as part of the ecosystem. As an aside, in nature, it is common for systems to be created temporarily, such as typhoons or eddies, but then disappear due to depletion of energy.

Density, Mass, Force, Motion, Quantity is assigned to simple tools and stones that are just standing still. When an object just stands still, it actually transmits gravity and endures external forces. Everything exists by some structure.

What makes it difficult for us to analyze the structure is that works overlap. In general, all tools created and used by humans have two tasks. One is to transfer human power to the object the tool works on. The other is to transmit the power of the tool to the object.

Structural analysis is often confused because the scope and parts of the structure are also different depending on the scope of the object specified by the observer (nominator). When the tool and the object are separate, such as slicing a radish with a knife, turning a screw with a drive, or writing with a pen, half of the structure is in the tool and half is in the object.

Lets first define the part where the tool and the object come into contact with Structure(Force) and analyze the structure. Then, the tool corresponds to Density, Mass, and Force, and the work target corresponds to Force, Motion, and Quantity. That is, when a pumpkin is cut with a knife, the handle is analyzed as Density, the knife body as Mass, the contact point between the blade and the pumpkin as Force, the slicing pumpkin as Motion, and the sliced ​​pumpkin as Quantity.

On the other hand, if you simply swing a sword in the air, the sword can be seen as simply transmitting human power. At this time, the handle corresponds to Density, the blade to Mass, the back of the knife to Force, the blade to Motion, and the tip to Quantity.

In terms of scope, one part includes another part, so it is not possible to clearly distinguish where it is partly as Density or Mass. In Gujoron, Density defines something that combines, so not only the handle is Density, but the human hand and everything that combines with it becomes Density. In other words, in a knife wielded by a human hand, the entire knife is Density, but the handle is typically responsible for Density. The names are divided for convenience, and in reality, they should be divided according to the task.

Mass is included in Density, likewise Force is included in Mass, Motion is included in Force, and Quantity is included in Motion. This expresses that the decision-making area narrows from the whole to the part as the case progresses. For example, with a pen, Density refers to the entire pen, but Quantity refers to only a part, the nib.

Energy, Matter, Space, Time, Information

I would like to unify the concepts that traditional physics has explained individually and in fragments. However, in this process, the existing physics terminology and my terminology do not match. I think my explanation is rather intuitive. A typical example is space-time in physics. It is not a difficult concept, but rather a difficult one as a result of misnamed names.

#

The cause of events is energy. Energy is a mathematical modeling expressed as an equation. To be precise, it is proportional. If A is input from one side and B is output from the other side, these two together are called energy. This is because the direction of the force changes during the convergence of the angular momentum. In an event, the force always changes from divergence to convergence. When divergence by A changes direction and converges by B, that is energy.

Let us investigate the cause of the event down to the ultimate level. The intrinsic nature of existence is denied, and instead it is defined by energy. Because existence must be interpreted secondarily in terms of the fluid (which drives the force to a point). However, energy cannot be directly observed and can only be estimated mathematically. What the human eye can see is only existence. Existence simply doesn't exist. There is a premise that leads to it. The premise is energy.

Einstein's "mass-energy equivalence (E = mc^2)" gives us a lot of inspiration. But is that mass intrinsic? Not like that. It is induced by something we do not know. Einstein called it spacetime, and I call it energy. Energy cannot be just mass. There is a procedure that must be induced. The law of entropy states that events have a direction. Energy precedes mass, i.e. matter. We see changes in matter on a daily basis.

'Water permeates', 'wood grows', 'stone rolls', and 'steel is heavy' are not energy but inherent properties. However, if matter is broken down to the elementary particle level, such secondary acquired properties become meaningless. In the ultimate stage, the individual has no meaning individually, but is meaningful only in the sense that several individuals gather and have the homogeneity of the fluid.

In a closed system, the fluid balances the axis and symmetry, and the part represents the whole. For example, the whole scale reacts sensitively to even a slight touch. We call it energy when it comes to being in a state of tight tension like such a fluid. The fluid is uniform, and if it is uniform, it is driven, and if it is driven, the part represents the whole and reacts extremely sensitively. Energy is the convergence of the intrinsic angular momentum of existence in one direction due to the properties of a fluid.

Existence has its own angular momentum acquired at the time of the Big Bang, and when these angular momentum converge and move side by side, it appears to be at rest, which is what we call 'matter'.

And it is 'space' where symmetry is broken by inconsistency inside the system, and 'time' is amplified and transmitted to the entire closed system until a new parallel is found. If this aftermath is transmitted to an external observer again, it is 'information'.

Energy can be said to be, for example, a state of a sensitive scale that reacts immediately when touched from the outside. A typical example is the sensitive reaction of uncertainty in quantum mechanics. The material is confined in symmetry due to the convergence of such energy properties. Space brings the hidden things out again, and time unfolds them in a row.

That is, energy conceals divergence, matter conceals convergence, space takes it back and drives it in one direction, time pushes it in one line, and information conveys it to the observer.

Energy - The balloon confines the diffusion (= divergence) of air.

Matter - It is the center of movement that becomes representative when you touch the balloon. A single point determines the overall direction of the balloon.

Space - Due to the balloon effect, if you press one side, the other side is pushed out.

Time - Once it starts coming out, it keeps coming out.

Information - The appearance is captured by the observer.

There is energy that induces matter, and matter changes, and the change is observed by humans. I call this process "Event".

Divergence-Convergence, Minus-Plus, Connection-Disconnection

We try to break down matter and arrive at its simplest. But this doesn't make any sense. A property is something that responds to the action of an external force. However, simple things do not have properties. Therefore, the simplest ones do not react.

The reaction is to change the direction of the force. To change direction, you must overcome an external force. But the simplest is lost. When light is reflected by a mirror, the mirror overcomes the light. Conversely, what if light just passes through? The mirror has lost. It does not respond to the ground. And if it does not react, its existence is denied. A vacuum does not exist because it does not respond to light.

Since the simplest things cannot have properties, they are not independent and are attached to other things. Anything less than the action of the observer cannot be observed. (The 'action' of the observer, not the observer, is greater than that of the object. The observer itself is smaller than the object.) To observe light, you have to hit the light with something smaller than the light to return the reaction. But nothing is smaller than light. Even if there is, it cannot be used by humans. That is the theory of special relativity.

Since there is no other way, the light (here like an object) has to observe itself. You need at least two objects to do that. The two are the observer and the object. This is like a double-slit experiment in which light interferes with light.

Energy is the interference of two objects with angular momentum. And particles (=materials) are two objects that converge energy by the destructive of the wave and become side by side. A particle is 1 with 2 hidden inside. Light is a substance that hides both electric and magnetic fields inside. This is the ultimate form of the universe.

What I am talking about is the self-transformation of existence that occurs in nature. It is the convergence of divergence-state energy with angular momentum to change into matter and reveal its shape. All changes in energy within a closed system follow one pattern from divergence to convergence. This is due to the problem of covering decision-costs.

If we assume that the initial state of energy in a closed system is divergence, then the only change in itself that occurs there is convergence, which is a minus loss of angular momentum. Since a closed system implies a uniform connection of internal resources, the only change that occurs there is severance. A minus here results in a plus elsewhere.

Divergence -> Convergence

Minus -> Plus

Connect -> Disconnect

Fluid -> Rigid

Potential energy -> Kinetic energy

Superstructure -> Substructure

We do not see the minus where the arrow leaves the bow, but pay attention to the plus that the arrow hits the target. And the plus is mistaken for the cause of the event. Therefore, they try to profit by increasing the plus. However, the plus loses angular momentum, so it cannot be controlled.

Convergence, expressed as a plus, acquires the form of matter, but instead loses the controllability of energy. In other words, the fluid loses its 'pushing to one place' property. Just as the excavator blade is controlled only when it is subordinated to the hydraulic system, the rigid body itself is not controlled and functions only in the fluid. We confuse this part and make mistakes when working.

Bones are rigid and muscles are fluid. Bones are controlled within muscles. If you try to gain anything, you will lose it, and if you manage what you lose anyway, you will gain it. Minus- Plus, Connection - Disconnection, Fluid - Rigid move in sets, but the minus side is larger and precedes and constitutes the causal side of the event. We can control it by intervening and controlling the negative side of the event. In pursuit of plus, we depend on chance or depend on others with energy and then become subordinate. We are tamed and subdued by others.

Potential energy, Kinetic energy

If it is said that potential energy is the state in which multiple interacting resources conserve angular momentum, then the state in which angular momentum converges can be said to be kinetic energy. We can use energy by converging potential energy and converting it into kinetic energy. Kinetic energy can only change the direction of motion that is already in progress, but cannot trigger new events.

Systems and mechanisms have potential energy, and structures and actions have kinetic energy. Density-Mass-Force has potential energy and Force-Motion-Quantity has kinetic energy. If the water-wheel of a water-mill is potential energy, the mill corresponds to kinetic energy.

Infinite power is a mistaken kinetic energy for potential energy. Kinetic energy is energy that is already being used. It can only change the way it is used, but it cannot be used anew. Energy can only be used as a way to turn divergence into convergence. Divergence unfolds in space, so we can only use energy in the form of folding space.

Therefore, if a person creates an institution, he must first introduce the space. That is, he must first describe the cylinder. An internal combustion engine has a cylinder, and so does a steam engine. Hydroelectric power has a waterbowl, and even wind power has a windbowl as much as the area of ​​a wing. Humans can use energy only by reducing the volume in a funnel shape.

Superstructure - Substructure, Fluid - Rigid Body

A water-mill is a combination of a water-wheel part and a mill part. The water-wheel part of the soft fluid is the superstructure, and the mill part of the hard rigid body is the substructure. Soft muscles are fluid, hard bones are rigid. Even in an automobile engine, the gas inside the cylinder is a fluid, and the piston that transmits the force is a rigid body. The fluid forms the superstructure, and the rigid body forms the substructure. A fluid is 2 and a rigid body is 1. Change 2 (the diffusion of a fluid with volume) to 1 (the convergence of a rigid body without volume).

Density-Mass-Force is the superstructure, and Force-Motion-Quantity is the substructure. The potential energy that receives energy is the superstructure, and the kinetic energy that transmits energy is the substructure. Events are superimposed, so there is always an energized superior. The input side of energy is the superstructure, and the output side is the substructure.

Where the individual is the substructure, the family or group is the superstructure. When employees are the substructure, the company is the superstructure. The previous stage of an event may simply be expressed as a superstructure. In this case, Density is the superstructure and Mass is the substructure. Similarly, if Mass is a superstructure, then Force is a substructure. Energy always moves in one direction from the superstructure to the substructure. Since the superstructure is like a fluid, it is bilateral, and since the substructure is like a rigid body, it is unilateral. Fluids produce forces, and rigid bodies transmit forces.

An event diverges from an open system that is influenced by an outside to 'rigid body -> fluid', and converges to 'fluid -> rigid body' in a closed system where external intervention is impossible. If a closed system is not specified, the event appears to change between 'rigid body -> fluid -> rigid body'.

If it is made into a closed system and viewed as a mechanism within the event, the event always has one-way flow -> rigid body. Energy goes from divergence to convergence in one direction. Progressive is fluid in the superstructure, and conservative is rigid in the substructure. Strategy is superstructure & fluid, tactic is substructure & rigid body. The cause of an event always takes the form of a group interaction, that is, a fluid.